next up previous contents
Next: Upward Left Curve Up: Geometric Design Previous: First Drop   Contents

Joint from First Drop to Upward Left Curve

This joint is specified knowing that there will be a very mild upward angle to the curve of the next element. The radius chosen is large in anticipation of the high velocities to be experienced through this joint.
\begin{spacing}{1} \begin{itemize} \item Initial Vertical Angle --- $-50$ \item... ...e} --- $1.5$ \item {\em Ending Vertical Angle} --- $3$\end{itemize}\end{spacing}


Darla Weiss 2000-02-13